e-medic™ Silence ST-M(i) Medical Computer
Powerful, fanless, Medical Mini PC with IP65 protection class on 5 sides
The fanless e-medic™ Silence ST-M(i) computers are compact medical PC systems that are ideal for long-term use in clinics and doctor's offices. A highlight of the e-medic™ Silence ST-M(i) is the already galvanically isolated interfaces, so the RS232 port is isolated with up to 4 kV and the RJ45 LAN connection with up to 5 kV. Additional external insulators are therefore unnecessary. The ST-M(i) also shines with high-quality features: 10th generation Intel processor, 3 HDMI monitor outputs, WLAN module with 2x combination antenna for 2.4 and 5GHz, heat pipe cooling system with all-aluminum heat sink profile housing as well as (optional) VESA mount and DIN/wall mounting bracket.
The aluminum profile housing reliably protects against mechanical stress. Small gap dimensions and special seals make the housing dust-tight and water-resistant on 5 sides according to IP 65. In addition, the e-medic™ Silence ST-M(i) can be used in temperature environments from 0 to +45°C and a relative humidity of 90%. There is a pressure compensation element to ensure tightness under all working conditions. The aluminum full metal housing is protected against electromagnetic interference (EMI), the EPDM seal is made of electrically conductive material. A heatpipe cooling system is attached directly to the black anodized all-aluminum heatsink profile housing. Optional mounting options include a DIN rail, DIN mount, wall mount and VESA mount.
Easy to disinfect
Thanks to special EPDM seals, small gaps and IP65 protection on five sides (except the back), the device is both dust and water-repellent, allowing it to be cleaned with suitable disinfectants without moisture penetration.

Fanless cooling CPU design
The temperature inside the closed, fanless aluminum housing is stabilized exclusively via a special CPU cooling system. The heat from the CPU is dissipated directly to the housing via an aluminum heat sink.
VESA 100/100
VESA mounting allows flexible positioning - e.g. B. close to the screen, under a shelf or on vehicle or trolley supports - which shortens cable routes and brings ergonomic and hygienic advantages.
Full facilities
The Silence ST-M(i) is equipped with an additional potential equalization (ZPA) on the housing. Thanks to RS232 and USB 3.0 interfaces and HDMI outputs as well as WLAN, the medical box PC is suitable as the basis for a fully-fledged practice system, for example when used on visiting trolleys, as a control interface for medical devices.
Electrical safety
The Mini-PC e-medic™ Silence ST-M(i) meets the requirements of electromagnetic compatibility according to IEC 60601-1-2:2014. In addition, the power supply of this product is tested for compliance with the safety standards EN / IEC 60601-1 for medical electrical devices. The e-medic™ computer may be used within the patient environment.
Betriebskompatibilität
Both Microsoft Windows 10 Pro (not included) and Microsoft Windows 11 Pro (not included) can be installed on the e-medic™ Silence ST-M(i). In addition, the e-medic™ ST-M(i) is compatible with Linux systems, such as Ubuntu.
Benefits:
- Hygienic design: Fanless, fully enclosed, IP65 protection (5 sides)
- Intel® Core™ i5-10500T, 16GB RAM, 250GB SSD
- 3x HDMI, 4x USB 3.0, 1x RS232, 2x LAN, 1x isolated LAN, Audio
- Robust housing
- CPU cooling system
- With built-in interface isolation (LAN & RS232 Ports)
- No operating system included. Without pre-installing Windows 10 Pro/Windows 11 Pro.
Specification
| Important Data | |
|---|---|
| Processor | Intel Core i5 10500T (Comet Lake) |
| Mainboard | GA-IMB410TN (rev. 1.0) / Intel® H410 Express Chipset |
| RAM | 2x 4 GB DDR4 (max. 32 GB) |
| SSD/HD | 250 GB Samsung SSD, m.2 |
| Graphics | Integrated graphics processor—Intel® (Intel UHD Graphics 630) HD Graphics Support: 1. 1 x D-Sub port (optional and shared with an HDMI 1.4 port, standard support HDMI), 2. 1 x HDMI port, supports a maximum resolution of 4096x2160@60 Hz, support for HDMI 2.0 version, HDCP 2.2, and HDR. 3. 2 x HDMI1.4a, supports a maximum resolution of 4096 x 2160@30Hz *Support for up to 2 displays simultaneously, maximum shared memory of 1 GB |
| OS | Windows 11/MS Windows 10 Home/Pro/Enterprise, MS Windows 10 IoT Embedded Enterprise, Ubuntu Linux |
| Interfaces rear | 4x USB 3.0, 2x RJ45 (Intel GLAN), 3x HDMI, 2x audio, additional IOs: 1x RS232 (DB9) up to 4kV isolated, 1x RJ45 (Intel GLAN) with integrated isolator (Baaske MI1005E) up to 5kV isolated |
| WLAN | Intel dual-band WLAN module 802.11 b/g/n/ac with 2x combo antenna for 2.4 and 5GHz, 5dBi |
| Power supply | DC input 12V, 5.5x2.5 mm plug (standard), or wide range input: 19-24V DC |
| Power consumption | Idle 10W, 100% load ~45 W |
| Cooling | Heatpipe cooling |
| Housing | Full aluminum heat sink profile housing, black anodized, front plate natural anodizedt |
| Dimensions | 218 x 222 x 77 mm |
| Mounting possibilities | VESA mount & DIN rail DIN/wall mount bracket |
| Weight | 2kg |
| Operating temperature | 0 to 45°C |
| Humidity | 90% rel. humidity |
| Protection class | IP65 protection class on 5 sides (rear side without additional IP protection)) |
| Standards | CE, RoHS, IEC 60601-1-2 |
Login