Product number:
2011536
Medical multiple socket outlet MEDX ZPA 5 modules, 3m cable length
- TÜV-certified for use with anesthesia equipment (60601-1)
- Each socket insert is double-protected
- Pull-out protection
- Can be attached to standard rails or infusion stands
- 2.5 mm² thick supply cable with kink protection on the housing
MEDX ZPA medical multi-socket outlet 5 modules, 3m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
- Medical power strip made in Germany
- TÜV certified for use with anesthesia devices
- VDE socket outlets with VDE certification mark
- Each socket insert is double-protected
- 2.5 mm² thick supply cable with kink protection on the housing
- Pull-out protection against unintentional changes to the electrical system
- Can be attached to standard rails or infusion stands
- 5-year warranty
Certification
| Important data | |
|---|---|
| Protection for socket outlet | 2 microfuses, each 5x 20 mm (DIN EN 60127-2/VDE 0820-2) |
| ZPA Stecker | According to DIN 42801 |
| Cable length | 3m & 5m |
| Number of modules min | 1 |
| Number of modules max | 8 |
| Total load each sockets | Max. 1400 W (D), max. 750W (CH)t |
| Total load multiple socket outlet | max. 3600 W ohne Schutzschalter, max. 3300 W (D), max. 1800 W (CH) bei Einsatz von Modulen mit thermischem Schutzschalter |
| Dimensions per modul in mm (LDH) | 90x 79x 60 |
| Total dimensions in mm | 1 Modul A 79 B 90 C 110 D 198 E 60 F 80, 2 Module A 79 B 160 C 180 D 268 E 60 F 80, 3 Module A 79 B 230 C 250 D 338 E 60 F 80, 4 Module A 79 B 300 C 320 D 408 E 60 F 80, 5 Module A 79 B 370 C 390 D 478 E 60 F 80, 6 Module A 79 B 440 C 460 D 548 E 60 F 80, 7 Module A 79 B 510 C 530 D 618 E 60 F 80, 8 Module A 79 B 580 C 600 D 688 E 60 F 80 |
| Housing | Anodized aluminum |
| Standards | Tested according to IEC IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012, IEC 60601-1:2005/AMD2:2012/AMD2:2020, ISO 80601-2-13:2011 / A1:2015 with the exception of clause 201.11.6.3 (Liquid ingress), ISO 80601-2-12:2011/AMD2:2018 |
| Delivery per modul | 1x individual multiple socket outlet *, 1x MEDX ZPA single guard kit green, 1x tee-handled socket wrench |
Downloads
Manual
Datasheet
Login
Ähnliche Produkte
Ähnliche Produkte
Medical multiple socket outlet MEDX ZPA 4 modules, 6m cable length
Number of modules:
4-fold
MEDX ZPA medical multi-socket outlet 4 modules, 6m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty
Medical multiple socket outlet MEDX ZPA 5 modules, 3m cable length
Number of modules:
5-fold
MEDX ZPA medical multi-socket outlet 5 modules, 3m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty
Medical multiple socket outlet MEDX ZPA 6 modules, 5m cable length
Number of modules:
6-fold
MEDX ZPA medical multi-socket outlet 6 modules, 5m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty
Medical multiple socket outlet MEDX ZPA 5 modules, 6m cable length
Number of modules:
5-fold
MEDX ZPA medical multi-socket outlet 5 modules, 6m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty
MEDX/MED5 ZPA Mounting Plate KIT
Mounting Plate KIT
Accessories for the MEDX ZPA/MED5 ZPA power strip
The mounting plate for the MEDX ZPA medical multiple socket allows flexible and secure attachment of the socket strip to various medical facilities. Thanks to the integrated holes for standard rail mounting claws and screw claws, installation is quick and easy. This is particularly advantageous in environments such as hospitals, clinics, or care facilities, where a stable and accessible power supply for medical devices is required.
For two or more modules, we recommend two mounting plates for secure installation.
Benefits:
Secure attachment of the power strip
Reliable and flexible
Quick and easy mount
Medical multiple socket outlet MEDX ZPA 8 modules, 5m cable length
Number of modules:
8-fold
MEDX ZPA medical multi-socket outlet 8 modules, 5m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty
Medical multiple socket outlet MEDX ZPA 5 modules, 5m cable length
Number of modules:
5-fold
MEDX ZPA medical multi-socket outlet 5 modules, 5m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty
Medical multiple socket outlet MEDX ZPA 4 modules, 5m cable length
Number of modules:
4-fold
MEDX ZPA medical multi-socket outlet 4 modules, 5m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty
MEDX ZPA Standard Rails Clamps (2 Pcs.)
MEDX ZPA Standard Rails Clamps (2 Pcs.)
Accessories for medical multiple socket strip MED5/MEDX ZPA
The standard rail clamps in a set of 2 are specially designed for attaching the medical multiple socket strips MED5 ZPA and MEDX ZPA to 25×10mm standard rails. In combination with the corresponding mounting plates, they enable quick, safe and flexible installation of the power strips on medical devices, walls or equipment trolleys. This solution is particularly suitable for use in clinics, doctor's offices and care facilities where a stable and standard-compliant power supply is required. The clamps are made of robust material and are designed for easy handling and durability.
Benefits:
High flexibility
Stable & standard-compliant
Durable, robust material
MEDX ZPA Pull-out Protection KIT Green
MEDX ZPA Pull-out Protection KIT in green
Effective Socket Protection for Medical Environments
The MEDX ZPA pull-out protection kit in green offers a practical solution for securing individual Schuko sockets in medical and safety-critical areas. Its specially shaped cover plate reliably prevents accidental insertion or disconnection of plugs—an essential safety feature when operating medical equipment. The simple bracket design (Form 01) allows for easy, tool-free installation and fits seamlessly into existing socket setups. The green color not only allows for quick visual identification but also supports color-coded organization of power circuits.
Benefits:
Prevents accidental plugging in or unplugging of plugs
Durable construction for long-term use
Green color for clear visual identification and power circuit organization/li>
Pipe Mount for MED5 ZPA
Pipe Mount for power strips
Accessory of the e-medic™ power strip MED5 ZPA
Mount your e-medic™ MED5 ZPA power strip flexibly and quickly using our MED5 ZPA pipe mounting, for example on an infusion stand. The maximum mounting diameter of 40 mm as well as horizontal and vertical holes allow you to mount it exactly in the places where you need your e-Medic power strip MED5 ZPA.
Benefits:
Safe hold
Easy mounting
Flexible
Robust material
Ähnliche Artikel
Ähnliche Artikel
Medical multiple socket outlet MEDX ZPA 8 modules, 3m cable length
MEDX ZPA medical multi-socket outlet 8 modules, 3m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty
Medical Multiple Socket Outlet MED5 ZPA
Medical Multiple Socket Outlet MED5 ZPA
Solid aluminum. TÜV tested. Patent pending
The MED5 medical 5-way socket is particularly suitable for use in the medical sector, for example to safely supply several electrical devices with power. At the same time, the MED5 allows connected devices to be connected via a ZPA (additional potential equalization). In this way, potential differences between electrical devices in medical use can be reliably prevented.
The TÜV-tested multiple socket meets, among other things, the relevant requirements of the DIN EN60601-1 standard for multiple sockets within the patient environment and can be used in rooms in application group 2 according to VDE 100 Part 710.
Each socket insert is individually secured against a short circuit with 2 micro fuses, so that even if one consumer fails, the operation of the other connected consumers can continue. Due to their special design, defective fuses can be replaced during operation. Another plus: the solid aluminum housing offers maximum stability and weight.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Benefits:
TÜV tested, medical multiple socket, made in Germany
Suitable for use with anesthesia machines
5 VDE socket inserts with VDE test mark
Each socket insert has 2 fuses
2.5 mm² thick supply cable with kink protection on the housing
Trigger protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
Medical multiple socket outlet MEDX ZPA – 5m cable length
MEDX ZPA medical multi-socket outlet – 8 modules, 5m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty
Medical multiple socket outlet MEDX ZPA – 5m cable length
MEDX ZPA medical multi-socket outlet – 8 modules, 5m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty
Medical multiple socket outlet MEDX ZPA 3 modules, 7m cable length
MEDX ZPA medical multi-socket outlet – 3 modules, 7m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty
Medical multiple socket outlet MEDX ZPA 4 modules, 8m cable length
MEDX ZPA medical multi-socket outlet – 4 modules, 8m cable length
Modular. Customized. Unique. TÜV-certified
The MEDX ZPA multiple socket outlet offers a tailor-made solution for your systems. A multiple socket outlet that adapts perfectly to your requirements in terms of capacity and space. Depending on your requirements, we can supply the MEDX ZPA multiple socket outlet with between one and eight socket inserts. The unique design allows for customization without compromising on important features. Each module has an additional equipotential bonding (ZPA) and two G-fuse inserts. The additional equipotential bonding on the housing offers further safety, so that the power strip can also be used as a local ZPA distributor.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems.
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Stable in use, flexible in application
The MEDX ZPA multiple socket outlet is a modern power supply solution that impresses with its versatility and can be perfectly adapted to your system. The modular socket strip can be individually expanded at the factory to up to 8 socket inserts or a total load of 3600 W. Each additional module has an additional potential equalization (ZPA) per socket insert, allowing you to use the power strip as a local ZPA distributor at the same time. In addition, each socket module is equipped with a pull-out safety device that reliably prevents changes to the electrical power supply.
Benefits:
Medical power strip made in Germany
TÜV certified for use with anesthesia devices
VDE socket outlets with VDE certification mark
Each socket insert is double-protected
2.5 mm² thick supply cable with kink protection on the housing
Pull-out protection against unintentional changes to the electrical system
Can be attached to standard rails or infusion stands
5-year warranty