Medical Multiple Socket Outlet MED5 ZPA – 5m
- TÜV tested, medical multiple socket, made in Germany
- Suitable for use with anesthesia machines
- 5 VDE socket inserts with VDE test mark
- Each socket insert has 2 fuses
- Trigger protection against unintentional changes to the electrical system
Medical Multiple Socket Outlet MED5 ZPA – 5m
Solid aluminum. TÜV tested. Patent pending
The MED5 medical 5-way socket is particularly suitable for use in the medical sector, for example to safely supply several electrical devices with power. At the same time, the MED5 allows connected devices to be connected via a ZPA (additional potential equalization). In this way, potential differences between electrical devices in medical use can be reliably prevented.
The TÜV-tested multiple socket meets, among other things, the relevant requirements of the DIN EN60601-1 standard for multiple sockets within the patient environment and can be used in rooms in application group 2 according to VDE 100 Part 710.
Each socket insert is individually secured against a short circuit with 2 micro fuses, so that even if one consumer fails, the operation of the other connected consumers can continue. Due to their special design, defective fuses can be replaced during operation. Another plus: the solid aluminum housing offers maximum stability and weight.
Double protection
Each socket insert is equipped with a reliable double fuse, making it particularly fail-safe. Two integrated micro fuses ensure that operation is not immediately interrupted even if one fuse is defective. This increases safety and ensures continuous use. In the event of servicing, the fuses can be replaced easily and without special tools, so that maintenance and repair are possible at any time without any problems
Pull-out protection
The integrated pull-out protection reliably protects the electrical system against unauthorized removal or tampering. This ensures safe operation and effectively prevents uncontrolled changes to the installation. Each pull-out protection is precisely tailored to the module and can be quickly and easily installed as needed. One pull-out protection is already included per module, so no additional accessories are required.
Kink protection
The MEDX is equipped with a particularly robust supply cable. The connection cable has a cross-section of 2.5 mm², which ensures safe power transmission even under high loads. In addition, the cable is equipped with integrated kink protection, which reliably prevents damage caused by frequent bending or tensile loads. This not only increases the service life of the cable, but also ensures a permanently secure connection in daily use.
AEB
Each socket module is equipped with a separate connection for additional equipotential bonding (AEB). This enables a secure connection to the building's equipotential bonding system, allowing equalizing currents to be reliably dissipated and preventing dangerous voltage differences. The ZPA increases electrical safety, reduces interference potential, and thus contributes significantly to operational safety and the protection of people and equipment.
Benefits:
- TÜV tested, medical multiple socket, made in Germany
- Suitable for use with anesthesia machines
- 5 VDE socket inserts with VDE test mark
- Each socket insert has 2 fuses
- 2.5 mm² thick supply cable with kink protection on the housing
- Trigger protection against unintentional changes to the electrical system
- Can be attached to standard rails or infusion stands
Specification
| Important data | |
|---|---|
| Protection for socket outlet | 2 miniature fuses 5 x 20 mm each |
| ZPA plug | 2 miniature fuses 5 x 20 mm each |
| Load per socket | Max. 1400W |
| Total load | Max. 3600 W |
| Dimensions (LWH) | 350 x 80 x 80 mm |
| Housing | Fully brushed aluminum, powder coated |
| Temperature during operation | -25°C to 40°C |
| Temperature during storage | -25°C to 70°C |
| Humidity druing operation | 5% - 95% non-condensing |
| Humidity druing operation | 5% - 95% non-condensing |
| IP rating | IP20 |
| Standards | Tested in accordance with IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012, IEC 60601-1:2005/AMD2:2020, with the exception of clause 201.11.6.3 (penetration by liquids), ISO 80601-2-13:2022, JIS T 0601-1:2023 |
| Warranty | 5 years |
| Delivered | 1x socket reader; 1x socket wrench; 1x drain lock completet |
| 3m cable length | Item no. 2007205 |
| 5m cable length | Item no. 2006395 |
Login
Similar products
Similar products
