Products from Hersteller
Related products
RS232 Isolator STD 2.5KV B 9Pin Order number: 2006539
RS232 Isolator STD 2.5KV B 9Pin | Transmission Mode: Asynchronous, half or full duplex, point-to-point | Signals Supported: Transmit Data, Receive Data | Data Rates: 0 to 115.2K bps | Isolation: 2500V RMS isolation for 1 minute
USB 2 Isolator STD 2324 EU Order number: 2011955
USB 2 Isolator STD 2324 EU 4-Port Fiber Optic USB 2.0 Extender, International (100-240V), Fibre connector: LC (Not included in bill of materials), Power Adapter : European plug. Approval / Standards: CE, EN 61000-3-2, EN 61000-3-3 and EN...
RS232 Isolator STD LWL 9Pin RL Order number: 2005422
RS232 Isolator STD LWL 9Pin RL Low power consumption 2mA. Connector: 1 x 9Pol SubD socket. LWL cable necessary. Baudrate: 110 - 115200, Transferred Signals: RxD TxD full Duplex, Maximum extension length of lwl cable:up to 20 meters,...
RS232 Isolator STD 4kv B Order number: 2005744
RS232 Isolator STD 4kv B Transmission Mode: Asynchronous, half or full duplex, point-to-point Signals: TXD, RXD, CTS, RTS Data Rates: 0 to 115.2 K bps Connectors: To DTE, DB-25 female; To DCE, DB-25 male Power Requirements: Port-powered...
RS232 Isolator STD LWL cable Order number: 2005532
RS232 Isolator STD LWL cable Prepared fibre glass cable for RS232 Isolators Price per meter
MEDX ZPA standard rails clamps (2 Pcs) Order number: 2007208
MEDX ZPA standard rails clips (2 Pcs) to mount MED5 ZPA on standard mounting rails. Required Accessory: mounting plate
MED5 ZPA guard bracket 5E02 Order number: 2006708
MED5 ZPA guard bracket 5E02 To prevent accidental pulling out or adding of SCHUKO plugs Covers: 5 power socket, type 02 bracket (complete)
MED5 ZPA mounting plate Order number: 2007232s
MED5 ZPA mounting plate Incl. drilling holes for universal rail or mounting clamps
pipe mounting for power strip MED Order number: 2006327
MEDX ZPA pipe mounting Clamp for a standard < 40mm. This clamp can be connected to the mounting bracket. Mounting diameter max. 40mm In combination with mounting plate Item No. 2007232
Power strip MED4 3m Order number: 2006330
Power strip MED4 3m Med. power strip 4 outlets, with plug protection, max. single load per socket: 450 Watts, max. total load: 1800 Watts, Primary cord: 3 m cable length, complete with 2 claws for rail mounting (Profile 25 x 10 mm),...
PE connection cable STD 4mm² 1m Order number: 2005710
PE connection cable STD 4mm² 1m for potential equalization according to DIN 42801 Length: 1m lead cross section: 4mm² Conductor Diameter: 3mm insulation green-yellow both ends with assembled right-angled spring-loaded socket...