- Order number: 2006539
2 Channel RS232 Optical Isolator galvanic signal isolation combined Receiver and... more
Product information "RS232 Isolator STD 2.5KV B 9Pin"
2 Channel RS232 Optical Isolator
- galvanic signal isolation
- combined Receiver and Transmitter in one case
- communication between DCE and DTE devices
- Data Rate up to 115.2K bps
The RS232 Isolator STD 2.5KV B 9Pin optically isolates both the RS-232 transmit and receive lines. The isolator has a DB9S female connector on the DTE side and a DB9P male connector on the DCE side. Typical DTE devices include PCs, terminals, and printers. Typical DCE devices include modems and multiplexers. These devices in compliance with the low voltage requirements can be easily communicate with each other.
Related links to "RS232 Isolator STD 2.5KV B 9Pin"
Transmission Mode: Asynchronous, half or full duplex, point-to-point Interface:... more
Technical Data "RS232 Isolator STD 2.5KV B 9Pin"
Transmission Mode: | Asynchronous, half or full duplex, point-to-point |
Interface: | RS-232 9Pin plug 9 Pin socket |
Signals Supported: | Transmit Data, Receive Data |
Data Rates: | 0 to 115.2K bps |
Power Requirements: | Port-powered from RS-232 data and handshake lines |
Isolation: | 2500 V RMS isolation for 1 minute |
Dimensions (L x B x H): | 61 x 33 x 17 mm |
Standards: | RoHS; CE; EN 55022; EN 61000-6-1; EN 61000 (-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11) |
Datasheet RS232 Isolator STD 2.5KV B 9Pin more
Download "RS232 Isolator STD 2.5KV B 9Pin"
Read, write and discuss reviews... more
Customer evaluation for "RS232 Isolator STD 2.5KV B 9Pin"
Write an evaluation
Evaluations will be activated after verification.