UPS Med Grade Tower Line 1000VA 230V

UPS Med Grade Tower Line 700VA 230V Reliable UPS solution for medical applications Provides IEC 60601-1 compliant emergency power supply for the medical sector of 700 VA/450 W, ideal for use in patient care areas. The built-in isolation transformer provides complete isolation while maintaining AC surge protection in all modes. Tripp Lite's SMX700HG medical UPS system provides reliable battery backup and, when connected to a hospital-grade outlet, fully complies with IEC 60601-1 regulations, making it ideal for use near patients. The 700 VA/450 W capacity provides up to 36 minutes of runtime at half load or 14.5 minutes at full load, allowing you to work through short power outages and perform an orderly system shutdown during a longer power outage. The integrated line-interactive voltage regulation corrects voltage drops up to 155 V and surges up to 274 V to a normal 230 V nominal output voltage without drawing on battery power. The SMX700HG's built-in isolation transformer with Faraday shielding provides complete isolation and removes common-mode interference while maintaining full AC surge suppression in all operating modes. The cumulative leakage current of all connected devices is less than 100 microamperes. This UPS system has six IEC320 C13 outlets suitable for hospitals and has an IEC320 C14 plug suitable for hospitals on a 15 cm long dongle. All six outlets offer both backup protection and surge protection with a power rating of 340 joules. The SMX700HG also features diagnostic LEDs, a USB port, and a serial DB9 port that work with Tripp Lite's free downloadable PowerAlert software to provide secure, unattended system shutdown and file saving in the event of a prolonged power failure. Benefits: Supports half load for up to 36 minutes; full load for up to 14.5 minutes Six IEC320 C13 sockets and IEC320 C14 plugs suitable for hospital use Leakage current less than 100 microamperes Approved for use in patient care areas Approved according to EN60601-1-2:2015, 4th edition 340 joules of surge protection protects connected devices Controls for muting/silencing the alarm are ideal for use near patients

UPS Med Grade Tower Line 700VA 230V with lithium battery Reliable UPS solution for medical applications This 230V SmartPro® hospital-grade UPS is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, which makes it ideal for use in medical facilities, including patient care vicinities. It allows you to work through short power failures, and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Long-Lasting LiFePhos battery (10,000 cycles) This UPS system for hospitals contains a replaceable lithium iron phosphate (LiFePhos) internal battery that provides up to 30 times the cycle life of traditional sealed lead acid (SLA) batteries. The 6-outlet UPS system provides up to 42 minutes of battery backup at half load and 18 minutes at full load. During normal operation, incoming utility power keeps the replaceable internal battery fully charged, so backup power will always be available.. Automatic voltage regulation (AVR) AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. This UPS for medical equipment can correct brownouts as low as 155V and overvoltages as high as 274V back to nominal 230V power without drawing on the battery backup needed to support your equipment during a blackout. Built-In isolation transformer offers full isolation The isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps. Combats electromagnetic interference Various electromagnetic and radio sources found in virtually every home and business can cause disruptive interference on the AC line. Known as EMI (electromagnetic interference) and RFI (radio frequency interference), this line noise is a common cause of performance problems and can lead to incremental hardware damage, data corruption and audio/video transmission problems. This medical-grade UPS system incorporates technology that filters out disruptive line noise so that it won’t affect your equipment. Easy-to-read LEDs & alarm report Front-panel LED indicators monitor essential information, such as line power, battery power, overload, voltage regulation and battery low/replace status. An audible alarm will sound in case of low battery, excessive load and power failure. Saves your files, even when you’re away USB and DB9 serial ports connect to your computer with the included cables. These ports communicate with free downloadable PowerAlert® software for safe, unattended system shutdown and file saves in the event of a prolonged power failure. Tower form factor for easy placement on a nurse’s station or mobile medical cart The long-lasting PVC housing fits easily on a desktop, shelf or anywhere else power is needed. The 15-centimeter (sixinch) dongle with hospital-grade C14 plug connects to a properly grounded AC wall outlet. Benefits: Lithium battery backup allows time to save files and safely shut down during blackouts 6 C13 hospital-grade (HG) outlets provide power to medical equipmente Approved for use within the patient care vicinityn Approved to EN60601-1-2:2015, 4th edition Alarm and front-panel LEDs report online, battery, fault and overload conditions 10,000-cycle LiFePO4 battery lasts up to 30x longer than comparable SLA batteries

UPS Med Grade Tower Line 1000VA 230V with lithium battery Reliable UPS solution for medical applications This 230V SmartPro® hospital-grade UPS is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, which makes it ideal for use in medical facilities, including patient care vicinities. It allows you to work through short power failures, and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Long-Lasting LiFePhos battery (10,000 cycles) This UPS system for hospitals contains a replaceable lithium iron phosphate (LiFePhos) internal battery that provides up to 30 times the cycle life of traditional sealed lead acid (SLA) batteries. The 6-outlet UPS system provides up to 42 minutes of battery backup at half load and 18 minutes at full load. During normal operation, incoming utility power keeps the replaceable internal battery fully charged, so backup power will always be available.. Automatic voltage regulation (AVR) AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. This UPS for medical equipment can correct brownouts as low as 155V and overvoltages as high as 274V back to nominal 230V power without drawing on the battery backup needed to support your equipment during a blackout. Built-In isolation transformer offers full isolation The isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps. Combats electromagnetic interference Various electromagnetic and radio sources found in virtually every home and business can cause disruptive interference on the AC line. Known as EMI (electromagnetic interference) and RFI (radio frequency interference), this line noise is a common cause of performance problems and can lead to incremental hardware damage, data corruption and audio/video transmission problems. This medical-grade UPS system incorporates technology that filters out disruptive line noise so that it won’t affect your equipment. Easy-to-read LEDs & alarm report Front-panel LED indicators monitor essential information, such as line power, battery power, overload, voltage regulation and battery low/replace status. An audible alarm will sound in case of low battery, excessive load and power failure. Saves your files, even when you’re away USB and DB9 serial ports connect to your computer with the included cables. These ports communicate with free downloadable PowerAlert® software for safe, unattended system shutdown and file saves in the event of a prolonged power failure. Tower form factor for easy placement on a nurse’s station or mobile medical cart The long-lasting PVC housing fits easily on a desktop, shelf or anywhere else power is needed. The 15-centimeter (sixinch) dongle with hospital-grade C14 plug connects to a properly grounded AC wall outlet. Benefits: Lithium battery backup allows time to save files and safely shut down during blackouts 6 C13 hospital-grade (HG) outlets provide power to medical equipmente Approved for use within the patient care vicinityn Approved to EN60601-1-2:2015, 4th edition Alarm and front-panel LEDs report online, battery, fault and overload conditions 10,000-cycle LiFePO4 battery lasts up to 30x longer than comparable SLA batteries