Network Isolator MED MI 1005 MB

Wall-mounted medical network isolator with Harting PushPull Technologie Safety: IEC... more
Product information "Network Isolator MED MI 1005 MB"

Wall-mounted medical network isolator

with Harting PushPull Technologie

Safety: IEC 60601-1:2012 (Edition 3.1 Medical electrical equipment)
EMV: EN 60601-1-2:2015  (IEC 60601-1-2:2014) (Medical electrical equipment)

The MED MI 1005 MB passive network isolator is specifically designed for wall mounting in medical environments. It provides galvanic network isolation for electronic medical devices and systems starting directly at the wall outlet.

Once it is mounted to the wall, the isolator is well-protected by the housing. Accidental impacts can be absorbed, protecting the isolator and network cable connector from damage. 

The MED MI 1005 MB network isolator delivers dielectric strength up to 5 kV, up to 10 kV DC for 10 seconds under high-stress conditions. Coupled with Harting PushPull technology, an absolutely stable connection. No installation of drivers or additional software necessary because the MED MI 1005 MB network isolator behaves fully transparently on the data network.

The Network Isolator MED MI 1005 is also available as a flexible isolator or for build-in isolator.

Benefits:

  • Isolation starting at the wall outlet
  • Fixed installation – flush-mounted fitting
  • Protects medical devices and patients against excessively high leakage currents in the data network
  • Durable housing – absorbs minor impacts to protect the isolator and network connection cable
  • No installation of drivers or additional software required
  • Inexpensive and efficient operation. No dedicated power supply required
  • Completely secure connection when coupled with Harting PushPull technology

 

Technical Data:
Isolation Voltage: 5,000 V
Data Speed: 10/100/1000 MBit/s
Conformity Ethernet: IEEE 802.3
Standards approved by: IEC 60601-1 (3rd Edition); IEC 60601-1-2 UL 60601 (UL Listed E342310)
Connections:: 2 x RJ45 input / output
Material: UL94V-0 / RoHS-compliant
Time between failures: 0.21 x 10 ^ 8 (1 error in 21 million hours)


For more information, please refer to our product information.

Conformity and Certificates:

The MI 1005 MB network isolators fulfill the high requirements of current medical standards as per IEC 60601-1 (3rd Edition) and IEC 60601-1-2. For this reason, these galvanic network isolators are ideally suited to use in medical sectors. The MI 1005 network isolators are listed for their consistent quality by UL in accordance with applicable UL standards and requirements. Representative samples of this product have been assessed by UL and fulfill the applicable safety standards. Use on US and Canadian markets is therefore possible.

More about the product:

faq network isolators

Downloads:

Datasheet_Network_Isolator_MI1005MB_Rev3.pdf 
Brochure Network Isolators  
Manual_MI 1005 E Medical Built In Isolator_Rev3.1.pdf

Related links to "Network Isolator MED MI 1005 MB"
Read, write and discuss reviews... more
Customer evaluation for "Network Isolator MED MI 1005 MB"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.