Compliance inspection

Acceptance test according to DIN 6868-157 Testing & calibration The partial acceptance test according to DIN 6868-157:2014-11 involves testing and calibrating a diagnostic workstation with one or two screens (including monitor, graphics card or graphics driver, display software such as DICOM viewer, and display sources such as PACS). In accordance with §16 of the German X-ray Ordinance (RöV), an acceptance test in accordance with DIN 6868-157 must be carried out during the installation and configuration of an image reproduction system. Among other things, this test checks whether the integrated screen of the image reproduction system is controlled at the correct resolution and whether the required reference values are complied with in accordance with the declared room class and the diagnostic method. Both the area of activity and the ambient light are taken into account, as they have a significant influence on the image quality of the monitor. Procedure: Testing and calibration of a device Consistency test Provision of calibrated measuring equipment as required by regulations Calibration according to DICOM §14 standard at the installation site, before each acceptance test Tests according to the current DIN standards, in this case DIN 6868-157 Preparation of test reports in paper and file form (PDF file) Explanations of the commission recommendations of the medical association Test recommendations for systems that are not yet subject to a valid test standard Identification of tested monitors (otherwise the responsibility of the radiation protection officer) Arrival/departure throughout Germany Notes: Minimum requirements for image reproduction devices DIN 6868-157. DIN 6868-157: Room classes