Fanless medical PC e-medic™ Silence XT

Fanless Micro-PC for medical applications e-medic™ presents with this fanless... more
Product information "Fanless medical PC e-medic™ Silence XT"

fanless_Micro_PC_e-medic_XT_Banner

Fanless Micro-PC for medical applications

e-medic™ presents with this fanless Micro-PC a high-quality housing for demanding users. The special CPU cooling design offers the usual reliable and quiet operation even under full load. Powerful Intel® processors of the 7th generation find enough space in the case with just 5.4 cm height, and convince with very low power consumption even at high computational power. Modern interfaces such as 4x USB 3.0, 2x HDMI, and LAN in combination with the RS232 serial interface also simplify the integration into existing systems. This micro case has VESA mounting points and can be easily attached to a table, wall support arm or monitor.
Technical Data e-medic™ Silence XT >>

 

 fanless_Micro_PC_e-medic_XT

Small and powerful

With a height of 5.4 cm, a width of 20 cm and a depth of 17.6 cm, the e-medic™ Silence XT is one of the smallest micro computers for medical use. The small housing still offers enough space for powerful Intel® NUC boards of the 7th generation. It is therefore ideally suited as the basis for a fully-fledged practice system for use on ward trolleys and as a control interface for medical equipment.

 

 Luefterloser_Micro_PC_e-medic_XT

Improvement of IT security
- closed front panel -

The improvement of IT security is fundamentally relevant for all hospitals. The security of patients and their (treatment) data is not only a central element of today's care processes, but is already derived from legal obligations such as KRITIS or data protection. In order to support doctors' practices, hospitals, clinics and supply centres in improving IT security, the e-medic™ Silence XT is also available with a closed cover to prevent access to the system via the front USB interfaces.

 

Fanless_Micro_PC_e-medic_XT_Interfaces

Fanless Cooling CPU Design

fanless_Micro_PC_e-medic_XT_CoolingCase

The temperature inside the closed, fanless aluminium housing is exclusively stabilized by a special CPU cooling system. The heat of the CPU is dissipated directly to the housing via an aluminium heat sink. A "hedgehog design" specially developed for micro computers is used to ensure stable running performance even at maximum computing power. The available housing area is enlarged in the same space, so that more space is gained for temperature compensation.

VESA Mount

Fanless_Micro_PC_e-medic_XT_VESA

The e-medic&trade Silence XT can be quickly and easily attached to any standard VESA 100x100 holding point by using the M4 screws included in delivery. All you need to do is attach the M4 screws to the four VESA mounting points on the monitor. At the bottom of the case there are special notches, which can be used to mount the Micro-PC.

 

Abmessungen des medical Mini PC

Fanless_Micro_PC_e-medic_XT_size

Electrical safety

The e-medic&trade Silence XT-M fullfits the requirements of electromagnetic compatibility according to EN 60601-1-2. In addition, the power supply of this product has been tested by TÜV with respect to compliance with EN 60601-1 and IEC 60601-1.

Complete declarations of conformity are available on request.
Hotline +49 (0)5741 236027 0
info@baaske-medical.de

Technical Data:

 
Processor: Intel® Core™ i3 / i5 up to 3 MB cache
RAM 32 GB max.
Hard drives 120GB SSD | 256GB SSD | 500GB SSD
Graphic IGP (via CPU/ APU)
Cooling System Direct Channel Heatpipe

 

Downloads:

Datasheet_e-medic_Silence_XT_Rev2
Manual_e-medic_PCs_Rev2

Related links to "Fanless medical PC e-medic™ Silence XT"
Read, write and discuss reviews... more
Customer evaluation for "Fanless medical PC e-medic™ Silence XT"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.